Payment & Shipping Terms:
|Item Mode:||GY6637TYNLD||Lamp Luminous Efficiency:||120lm/w|
|Ip Rating:||IP65||Color Temperature(cct):||2500-6500k|
|Input Voltage(v):||12V||Cri (ra>):||80|
|Solar Panel Type:||Monocrystalline Silicon||Battery Type:||LiFePO4 Battery|
|Warranty:||3 Years||Working Temperature(℃):||-20 - 50|
|Material:||High Quality Die-casting Aluminum Alloy||Certification:||CE,RoHS|
GY6637TYNLD 80watt Commercial Solar Powered Street Lights,
Ip65 road smart solar street light,
Ip65 Commercial Solar Powered Street Lights
GY6637TYNLD is the latest generation in our All-in-One solar street/carpark luminaires. With a lower profile sleek look, it provides a dependable light source with its powerful new light engine boasting up to 130lm/W with a range of optical distributions catering for a range of applications. The PV panel efficiency at 18%.
High Efficiency, Environmentally friendly led flood light.
Instantaneous start, easy installation, and complete with an efficient optical design.
High strength die-casting aluminum heat sink.
Covered with an electrostatic spray treatment. Main body made of die-casting aluminum.
Polycarbonate diffuser, anti high temperature, anti-ultraviolet,
high quality LED chips, high-efficiency light distribution curve.
EQUIPMENT AND COMPONENTS
Genuine quality equipment and components with guaranteed energy performance
Material: Aluminium Die-casting
LED Lamp: 3030 LED
Fixture power watt: 20W/40W/60W/80W
Color temperature: 2700-6000K
Solar Panel type: Monocrystalline silicon
Solar panel: 18V 25W/18V 35W/18V 45W/18V 70W
Battery Type: LiFePO4 battery (Lithium-Iron Phosphate)
Battery: 12.8V 9Ah / 12.8V 11Ah / 12.8V 18Ah /12.8V 28Ah
Charging Time: 10 Hrs
Battery (Full Charge) operating duration: 48 Hrs
Mounting Height: 5 – 8m
Working Temperature: -20℃ – +60℃
LED solar streetlight: stand-alone product, no electricity bill, and no grid connection.
Very long lifetime: innovative high heat resistance NiMH battery & intelligent lighting management.
Lighting service all night long: enhance personal safety, economic and social activities.
User friendly: Plug & Play and All-in-one concept, easy installation.
Connected product: Bluetooth enabled for product registration, remote monitoring, troubleshooting, and lighting profile management.
|Input voltage||DC power by solar panel|
|Beam angle||as the distribution curve show|
|Application area||courtyard, park, roadway, garden|
|Material||Die-cast aluminum + PC lens|
|Charging time||6 hours under strong sunlight|
|Working model||The light goes out during the day and lights up at night. The lights light up when people come (100% on), with a delay of 25 seconds; the lights go off when people left (20% on).|
|Discharge time||2-3 days|
|Color rendering index||＞70|
|Solar panel||Monocrystalline silicon|
|Accessories||1 pcs remote controller|
Solar street lights consist of 5 main parts:
The solar panel is one of the most important parts of solar street lights, as the solar panel will convert solar energy into electricity. There are 2 types of solar panels: monocrystalline and poly-crystalline. The conversion rate of the mono-crystalline solar panel is much higher than poly-crystalline.
LED is usually used as a lighting source of the modern solar street light, as the LED will provide much higher Lumens with lower energy consumption. The energy consumption of the LED fixture is at least 50% lower than the HPS fixture which is widely used as a lighting source in Traditional street lights. LEDs' lack of warm-up time also allows for use of motion detectors for additional efficiency gains.
The battery will store the electricity from the solar panel during the day and provide energy to the fixture at night. The life cycle of the battery is very important to the lifetime of the light and the capacity of the battery will affect the backup days of the lights. There are usually 2 types of batteries: Gel Cell Deep Cycle Battery and Lead Acid Battery and many more.
The controller is also very important for the solar street light. A controller will usually decide to switch on /off charging and lighting. Some modern controllers are programmable so that the user can decide the appropriate chance of charging, lighting, and dimming.
Strong Poles are necessary to all street lights, especially to solar street lights as there are often components mounted on the top of the pole: fixtures, panels, and sometimes batteries. However, in some newer designs, the PV panels and all electronics are integrated into the pole itself. Wind resistance is also a factor
Parks / Open areas
• Foam Protection to Withstand Harsh Transportation and Impact
• Carton and Pallet with Foam and Cling Wrap to Withstand Impact, High Humidity in Containers, and Rainy Weather
• To Guarantee an Intact Condition when Receiving the Goods
1. DHL(a big discount)
3. DHL Airway express. About 3-5days you can get them by the door of your home or office.
4. Seaway.15-25 days. It will definitely save your shipping cost for the large order.
Q1 What is your terms of payment?
T/T 30% as deposit in advance, and 70% balance full paid before the shipment
We'll show you the photos of the products and packages before you pay the balance.
Q2 Can I get a sample order first?
Yes.Welcome sample order to test quality.
Q3 Is your enterprise a factory or trading company?
We are a manufacturer specializing in R&D.
Q4 What kind of products are you specializing in?
We focus on the LED street light, LED flood light, LED high bay light, LED explosive proof light, and so on.
Q5 All LED lights have a warranty?
Yes.All kinds of products at least 3 years warranty.
Q6 What about the packing for bulk orders?
If the bulk order's quantity reaches the custom MOQ, we can provide you the customer service.
Contact Person: Jane