1.Fixed the lamp bracket to the mounting position, as shown figure
2.Connect the input wire to the wire connector, as shown figure2;
3.Adjust the lamp Angle to the right position:
a. Screw off the butterfly nut, remove the bolt, then the u-bracket will rotate easily.
b. Adjust the light projection direction to the suitable position.
c. Pass the bolts through the u-bracket hole and dial hole at the same time and tighten the butterfly nut so that the u-bracket does not loosen, as shown figure 3;
If there need to adjust the projection direction of a single module, please follow these steps:
a. Remove (1) screw with a cross screwdriver;
b. Loosen the (2) screw with a hex wrench;
c. Rotate the module to the right position, Module Angle adjustment range: -30°~30°;
d. Tighten the (1) screw and (2) screw, as shown figure 4.
e. After checking, power on.
GYLED has very strict Quality Control System, from checking and evaluation of incoming materials to the delivery of products, each item will be checked and tested for several times.
1. DHL(a big discount)
3. DHL Airway express. About 3-5days you can get them by the door of your home or office.
4. Seaway.15-25 days. It will definitely save your shipping cost for the large order.
Q1 What is your terms of payment?
T/T 30% as deposit in advance,and 70% balance before the shipment,
We'll show you the photos of the products and packages before you pay the balance.
Q2 Can I get sample order first?
Yes.Welcome sample order to test quality.
Q3 Is your enterprise a factory or trading company?
We are the manufacturer specializing in R&D.
Q4 What kind of products are you specializing in?
We focus on LED street light,LED flood light,LED highbay light,LED explosive proof light and so on.
Q5 All LED light have a warranty?
Yes.All kinds of products at least 3 years warranty.
Q6 What about the packing for bulk order?
If bulk order's quantity reach the custom MOQ,we can provide you the custom service.